Skip to Content
WizzIQ® is a brand of ICOR, Belgian manufacturer since 1989

Our technology

One system, designed as a whole: resin, light, power.

Most kits bring together products from different sources. WizzIQ was born from another idea: develop a resin, the lamp that cures it and the power that drives them, together. Each element is tuned to the others.

WizzIQ LED-UV lamp

Acid-free

It does not attack the coatings of recent glazing (heated windscreens, for example) and travels without special transport restrictions.

Compatible

with the mechanical, pneumatic or electronic injection systems already in place.

Very fluid

Its low viscosity and wetting agents carry it into the finest cracks. On the Automatic, the longest cycle lasts 4 minutes, without losing any strength.

0 to 35 °C

Its viscosity changes little with temperature. Stored in the cold, it does not crystallise.

1 resin

for stars, bull's eyes and combination breaks, whatever the tint of the glass.

1.478

refractive index, close to that of glass: little rainbow effect, the impact fades away.

Durable

Strong and flexible at the same time. It does not yellow or shrink over time.

18 months

of shelf life in a UV-protected bottle. An opened bottle does not dry out.

Repair in all weathers

Drag the slider: the WizzIQ resin stays fluid from 0 to 35 °C, in a cold workshop as well as in a car park in midsummer.

-10 °C45 °C

5 °C

WizzIQ resin:fluid, repair nowout of range, wait
Common resins:within their rangeoutside their range
Injecting 0.2 ml of WizzIQ resin

Proudly made in Belgium

Proudly made in Belgium. Our resin is the fruit of 15 years of research with a leading chemical partner. Launched in 2015, it has been improved ever since. Every formula was developed and tested for one use only: repairing laminated glass, quickly and durably.

75 s

then automatic stop. The resin's photoinitiator and the LED wavelength are matched.

100 %

of power at every switch-on, with no warm-up time.

4 cm

of deep curing, even through the glass.

20,000 h

of service life, for about 125 hours of use per year at 20 repairs per day.

Always at full power

Power emitted over successive switch-ons (illustration).

WizzIQ LED-UV lamp

Fluorescent lamp, after many switch-ons

A fluorescent tube loses power with time and the number of switch-ons, and has to warm up before it emits. The LED emits at once, at 100%, every time.

WizzIQ LED-UV lamp on a windscreen

Designed for the field

3 stable suction cups on curved glass, a blue positioning LED, an offset LED to repair close to the edge, a single button.

Cordless, independent of the vehicle

Li-ion battery: no connection to the 12 V socket, no risk for the car's electronics. The electronics guarantee full power even with a low battery and refuse to start a cycle they could not finish.

Up to 100 repairs per charge

15 minutes of charging already gives about ten repairs.

0

cable between the lamp and the vehicle.

7–36 V

rechargeable from any source in this range.

1.2 m

drop withstood: glass-fibre reinforced polyamide, low centre of gravity.

USB

charger supplied with the lamp.

Finishing resin on the windscreen

The finishes

A repaired impact must disappear and last. The finishing consumables are developed together with the repair resin.

95 %

UV transmission for the 95 µm pre-cut films, rigid for a perfectly flat result.

Pit fill

more resistant to the next impact, unaffected by car care products, easy to scrape off.

By hand

a polishing paste for a glossy finish, without a machine.

WizzIQ Automatic machine screen

The Automatic

The same resin and the same lamp, with a machine that controls pressure and vacuum instead of the technician.

Automatic cycles

pressure and vacuum cycles, 4 minutes at most.

Closed

a system that controls air and moisture.

3 + 1

programmes: star, bull's eye and combination, plus a manual mode for experts.

6 languages

on the machine screen: FR, NL, EN, DE, IT, ES.

Discover the WizzIQ Automatic